The quick answerBefore a large-TV installation, send the exact TV model number, the screen's outside dimensions and weight without its stand, its VESA mounting pattern, and the exact mount model. Add the wall's usable width and height, seating distance, desired screen-center height, console and soundbar dimensions, outlet and cable locations, and eight clear photos covering the full wall, wall surface, nearby corners, power, devices, room sightline, access route and TV carton label. These details improve planning, but the installer must still verify the wall structure, hardware and final placement on site.
Start with the exact TV and mount, not only the screen size
A label such as “75-inch TV” describes the diagonal picture class, not the cabinet width, weight or mounting pattern. Copy the complete model number from the carton or manufacturer label. Then use the official product page or manual to record the width, height and depth without the stand, the weight without the stand, the VESA hole pattern and the specified screw information.
Send the exact mount model too. The installer needs to compare the mount's supported weight and VESA range with the television, and to know whether it is fixed, tilting or full-motion. Do not assume that a bracket marked for a broad screen-size range automatically fits every model in that range.
- Full TV model number and a clear photo of the carton or rear model label
- TV width, height, depth and weight without the stand
- VESA pattern and manufacturer-specified screw information
- Exact wall-mount brand and model, including any soundbar attachment
Measure the usable wall and the finished room
Measure the clear wall width and height where the screen could sit, not the room's full dimensions. Note the distance from the finished floor to the ceiling, console top, mantel, shelf, outlets, wall plates and any nearby door or window trim. If a soundbar will be mounted, include its height and the gap you want between it and the television.
Record the main viewing distance from the seated eye position to the proposed screen plane. Also note the desired screen-center height if you have already tested it with painter's tape. Measurements help prepare options; they do not replace an on-site check of structure, clearances and viewing comfort.
| Measurement | Where to measure | Why it helps |
|---|
| Usable wall width and height | Between trim, openings, shelves and permanent obstacles | Shows whether the TV and bracket can fit with working clearance |
| Floor to console, mantel and outlets | From the finished floor to each top edge or centerline | Helps plan screen and soundbar placement |
| Main viewing distance | Seated eye position to the proposed screen plane | Supports a room-fit discussion before drilling |
| Console and soundbar dimensions | Outside width, height and depth | Prevents avoidable overlap and cable-access problems |
Send these eight photos
Take the photos in good light and keep location services or unrelated personal information out of the frame. A wide view should show how the wall relates to seating and windows; close views should show the actual finish and connection points. Photos support planning but cannot prove what is behind drywall, plaster, tile, brick or paneling.
- The entire proposed TV wall, photographed straight on
- A room-wide view from the main seating position
- A close view of the wall surface and any fireplace, tile, brick, paneling or built-ins
- The outlet, low-voltage plate and any visible cable entry points
- The media console, soundbar and devices that must remain connected
- A side-angle view showing windows, doors and nearby corners
- The path from the entrance to the room, including stairs, narrow turns and elevator access
- The TV carton label and mount-box label with model numbers readable
Map power, signals and equipment before the screen covers the wall
List every device that will connect to the display: soundbar or receiver, streaming player, cable or satellite box, game console, antenna and network equipment. Identify where each device will live and which cables are already available. If you want concealed wiring, describe the desired finished appearance without assuming that household extension cords or ordinary detachable power cords can be hidden inside a wall.
For HDMI eARC, high-refresh gaming or long cable routes, include the device models and intended features so the cable and port plan can be checked against the manufacturers' documentation before the TV is lifted.
- Outlet and low-voltage plate locations
- Device list and final device locations
- Needed HDMI, antenna, Ethernet and audio paths
- Wi-Fi or wired-network plan at the finished TV location
- Whether cables should remain accessible for future service
Check the handling route for a large screen
Measure the narrowest doorway, stair landing, hallway turn and elevator opening between delivery and the room. Compare those spaces with the packaged dimensions from the manufacturer, not only the unpacked television dimensions. Keep the screen upright and follow its handling instructions; do not unpack or lift a large panel alone merely to make the route appear easier.
Tell the installation team about parking, building work hours, elevator reservations, certificates of insurance or an authorized person who must approve final placement. A delivery appointment and an installation appointment are separate unless the provider has confirmed otherwise.
Build one clean pre-install packet
Put the model numbers, measurements, photos, device list and access notes into one message or shared folder. Label every photo by room and avoid sending account passwords, door codes or unrelated household documents. Mark uncertain details as “needs on-site verification” instead of guessing.
QuickMountTV owns this Journal. When you are ready to request an installation plan, use the booking calculator once with the complete packet available so the requested scope reflects the actual room and equipment.
Common questions
Can photos confirm that a wall will support a large TV?
No. Photos can identify visible finishes and help the installer prepare, but the wall structure, attachment method and hardware still require on-site verification.
Which TV measurements matter before mounting?
Use the exact model's outside width, height and depth without the stand, weight without the stand, VESA pattern and specified screw information—not only the advertised diagonal screen size.
Should I send passwords or door codes with the photos?
No. Keep account credentials and access codes private. Arrange secure access separately and enter device-account passwords yourself during setup.
Sources & service information
Confirm model-specific instructions, service scope, availability, and applicable terms before booking.