QuickMountTV™ · Blog · How-To
Moving? How to Take Down a Mounted TV — and Remount It Right
TVs survive moves badly for one reason: people treat the unmount as the easy part. Panels crack from twisting during removal, brackets get separated from their hardware, and the new wall turns out to be brick when all your hardware was for drywall. Here's the sequence that protects the TV, the deposit, and your weekend.
Taking the TV down without cracking it
- Photograph everything first — cable connections, bracket position, height from floor. Future-you will thank you at the new place.
- Find the locking mechanism. Most brackets secure the TV with safety screws or pull-tabs at the bottom edge. Forcing a locked TV upward is how panels crack.
- Two people for anything over 50". One lifts, one guides the plate off the rail. Lift straight up, never twist.
- Bag the hardware and tape it to the bracket. The M8 bolts that fit your TV are the exact ones you'll need again.
Patching the wall you're leaving
Lag bolt holes are ½" or smaller — a knife-blade of spackle, a sand, and touch-up paint makes them disappear. If cables ran in-wall, the plates come off and the openings get patched with a drywall repair kit. For renters this half hour is deposit money; for sellers it's one less inspection note. Keep the old bracket if the new home has drywall; masonry or steel-stud walls at the new place mean new anchors regardless.
Transporting a flat panel
Upright, always — never flat. A panel laid face-up or face-down flexes over bumps and the glass or backlight layer cracks from its own weight. The original box is ideal; otherwise sandwich the TV between moving blankets and keep it wedged upright between mattresses or against the truck wall. Note that many moving companies exclude unboxed TVs from liability — check before moving day.
Remounting at the new place
The new wall resets everything: stud spacing, wall material, outlet position, even ideal height if the room's seating sits differently. Re-verify studs rather than trusting the old bracket's hole pattern, and re-torque every bolt — hardware loosened during transport is the classic remount failure. Or skip the ladder entirely: QuickMountTV™ does unmount-only, remount-only, or both ends of a move, with the remount covered by the same 3-year warranty as a new install.
Frequently asked
- Can I reuse my TV mount after moving?
- Usually yes, if the new wall is the same material and the bracket survived transport with all its hardware. New wall type (brick, steel studs, plaster) means new anchors even with the same bracket.
- Will movers take down a mounted TV?
- Most full-service movers won't unmount TVs — it's outside their liability. They'll transport a boxed TV, but the unmount and remount are on you or a mounting service.
- How much does it cost to unmount and remount a TV?
- Unmount-only typically runs $49–$99; a remount at the new home prices like a standard install since the work is the same. Booking both ends together is usually the best value.
Book a pro install
Skip the DIY: book a licensed, $2M-insured QuickMountTV™ technician at quickmounttv.fieldd.co. Same-day appointments, flat-rate pricing, 3-year workmanship warranty.
Related guides
Book a pro in your city
- TV Mounting in Orange County, CA
- TV Mounting in Los Angeles, CA
- TV Mounting in Phoenix, AZ
- TV Mounting in Scottsdale, AZ
- TV Mounting in Mesa, AZ
- TV Mounting in Chandler, AZ
- TV Mounting in Gilbert, AZ
- TV Mounting in Glendale, AZ
- TV Mounting in Tempe, AZ
- TV Mounting in Peoria, AZ
Find a TV mounting pro near you →